FAQ
Question: When using the optional Water Watch Water Meter, the amount of product being dispensed does not appear to correspond with the setting on the dial.
Answer:The G-10 was calibrated at 40psi of water pressure. Psi above or below this will vary the distribution rate. The simplest way to solve this problem is to use an inexpensive pressure regulator on your faucet. This type of pressure regulator can be found at most hardware stores, discount stores, and RV/camper dealerships for less than $10. Another way to reduce back pressure is by adding additional holes to the root feeder probe. Click here for instructions.
See G-10 Useful Tips and G-10 Instructions
