FAQ
Question: When using the Liquid Setting, the bottle appears to be getting fuller and does not draw liquid out.
Answer:This is almost always caused by too much water pressure. The G-10 was designed to work with standard household water pressure. It works best between 20-40psi. Too much pressure will cause the G-10 to not feed properly and possibly leak around the seams. If this happens, you can simply turn down the water faucet to a level the feeds properly or you can use an inexpensive pressure regulator set to around 40psi. This type of pressure regulator can be found at most hardware stores, discount stores, and RV/camper dealerships for less than $10. The regulator is the preferred method. See G-10 Useful Tips and G-10 Instructions
Another way to reduce back pressure is by adding additional holes to the root feeder probe. Click here for instructions.
