FAQ
Question: Can I use thick viscosity liquid products with the G-10 and will it dispense the correct amount shown on the dial?
Answer:If your product is very thick, it may not feed at the correct rates because the feeder holes in the G-10 are very small when set to the Liquid Settings. You may thin the product with water and change the setting to compensate for a weaker solution. Another option would be to leave the straw/diptube installed in the G-10 cap and dial the Dry/Granular setting. This will draw the thicker product out faster. This works very well with systemic insecticides. The amount being dispensed will vary, based on the thickness of the product and your water pressure. You should run some tests to see exactly how much product you are dispensing.
